Welcome Shandong Xinkaite bearing Co.,Ltd. Phone:+86 635 5638235   Fax:+86 635 5638235   Email:xkte@xinkaite.com Chinese English Search:
信息内容
 
The methods to judge whether the lubrication grease of the conveyor idler...
announcer:Shandong Xinkaite bearing Co., Ltd.   read:973
 

The methods to judge whether the lubrication grease of the 

conveyor idler bearing has metamorphosed


The lubrication grease is very important while the conveyor idler bearing is working. If the lubrication grease has metamorphosed, not only it could not play the role, but also it would damage the conveyor idler bearing. There are some methods to judge whether the lubrication grease has metamorphosed.

 

1. Drip some drops of the lubrication grease onto a piece of clean and white filter paper, after the lubrication grease leaks, if it appears some black powder on the surface, and we feel astringent when touching it, it shows that there are some impurities in the lubrication grease. Good lubrication grease does not have powder, and we will feel smooth when touching it.

 

2. Two measuring glass: one with the lubrication grease waited to be tested in it, the other glass is empty on the desk. Raise up the glass with lubrication grease and pour the lubrication grease slowly into the empty glass, observe the flow condition of the lubrication grease during the pouring process, the flow of good lubrication grease must be uniform, threadlike and continuous. If the flow is sometimes fast and sometimes slow, and there is big block of the lubrication grease flowing down, it shows the lubrication grease has metamorphosed.

 

3. In a sunny day, raise up the lubrication grease with screwdriver to make it face the sunshine, we observe the drops of the lubrication grease, and we could see clearly under the sunshine whether there are scraps in the lubrication grease, if there is no scrap, the lubrication grease could continue to be used; and if there are scraps, we should change the lubrication grease.

 

4. Grind the lubrication grease with our fingers, we would feel smooth, few scraps and little friction for good lubrication grease; and if we feel strong friction, it shows there are impurities in the lubrication grease, so we should change it.


Sincerely,

Written by Flavio.Xie, China,
Shandong XinKaite Bearing Co. Ltd.,

My Email:03@xinkaite.com




Previous: The application of conveyor idler bearing in the mining industry     Next: The features of the damping idler bearing

Shandong Xinkaite Bearing Co.,Ltd.   Phone: +86 6355638235   Fax: +86 635 5638808   Email: xkte@xinkaite.com   


Link: